Features
- Water-proof
- High Response
- Simple Operation
- Small, Light-weight
Easily Measure Temperature by Non-contact
LTM-100 can measure a surface temperature easily from a remote place.
This infrared sensor is ideal for applications where contact may cause contamination, the operator may be at risk due to high temperature, or when an object is in motion.
Features
Measuring Range | -40 to 300°C |
Operating Temperature | 0 to 50°C |
Operating Humidity | 90% rH and below (no condensation) |
Measuring Accuracy | When the ambient temperature is 25±2°C and the emissivity is 1, 0 to 300°C : bigger value of either of ±1% of the measured value ±1digit or ±(2Ž+1digit) -30 to0°C : ±3°C ±1digit below -30°C : ±5°C ±1digit |
Repeatability | within 1°C ±1digit |
Response | 1sec (90% response) |
Collimation | Laser beam (650nm 1mW JIS class2) specifies the center. |
Display | Reflecting type LCD |
Display Resolution | 0.5°C. 1°C for below . 20°C and over 100°C |
Emissivity Settings | Before shipment: 0.95. The value can be altered between 0.8 and 1.0 with the slide switch at the lower part of the battery compartment (by 0.05 steps) |
Auto Power Off | If no key is pressed for 30 seconds, the power is shut off automatically |
Water-Proof Property | IP67 |
Approved Standard | CE marking : EMI EN61326 ClassB ,EMS EN61326 Annex C Stability : ±5.0°C under EMC test environment at 25°C |
Housing material | ABS (antibacterial) |
Weight | Approx. 123g |
Battery | 2 AAA alkali cell batteries ( Battery Life : Approximately 10 hours for continuous use ) |